PAA-G-LINER (UV)

PAA-G-LINER (UV)TECHNICAL SPECIFICATIONS Product PAA-G-Liner™ is designed for renewal of gravity pipes. The PAA-G-Liner™ is tailored to each individual installation at our ISO certified factory in Aarhus. The polyester impregnated liner is cured by means of UV light and can be used for different applications such as stormwater pipes, wastewater pipes and industrial pipes. Properties The PAA-G-Liner™ is manufactured from glass fibre mats. This material ensures a light expansion during installation and thereby a tight connection to the existing pipe in which the liner is installed. The longitudinal reinforcement of the liner provides high tensile strength which means that several hundred metres of liner can be installed. 6 Product PAA-G-Liner™ Diameter Wall thickness Host pipe shape Host pipe material Bends Installation length Curing media Effluent temperature Pipe condition 180-1,200mm 4-12mm Circular, Egg-shape, square Mainly concrete and clay Yes (Max. 15°) Up to 220m (Depending on Liner dimension) UV Light 0-60°C (Depending on pH) Yes / I, II and III (fully deteriorated) PROPERTIES Short term: E-modulus Bending strength Compressive strength VALUES 15,700 Mpa 280 N/mm2 184 N/mm2 DOCUMENTATION DIN EN 1228 DIN EN ISO 178 DIN EN ISO 604 Long term: E-modulus Bending strength Compressive strength 11,450 Mpa 200 N/mm2 134 N/mm2 DIN EN 761 Report: DIBt Zulassung Z-42.3-478 The PAA-G-Liner™ differs from similar products and has the following advantages: • Low wall thickness and high mechanical properties. • Inner fleece providing high wear resistance. • Integrated sliding foil. • Special unthickened pseudoplastic resin which provides minimum drainage and makes it possible to carry out installation even in cold weather. • Custom-designed inner foil of high flexibility and high strength. Publication: March 2022, V3Page 1